Signle Lane RFID Access Carbon Steel Powder Coating Full Height
Gate
Introduction:
This full height turnstile gate is suitable for public places with
high traffic flow. The service life and safety are the primary
considerations of this product. The whole system runs with
steplesssub-positioning device to achieve smooth operation, low
noise and less wear. After a large number of project actual use
data summary, the actual service life of the equipment is more than
5 million times.
Main Material:
Case: SUS304 or 316 1.5mm stainless steel
Movement: 45# steel, surface plating color zinc
Door : stainless steel turntable
Movement Performance:
Cabinet: stainless steel turntable
Drive mode: servo mobile positioning drive
Power drive: semi-automatic
Open the door:single rotation
Switching door speed: 0.4~0.8 seconds (user can set)
Channel width: 600mm;
Equipment noise:less than 30db
Passing speed: normally closed mode 35 people / minute; normally
open mode 60 people / minute
Movement life: 5 million times
Features:
The whole system runs with stepless secondary positioning device.
The running process is controlled by sensors without mechanical
collision.
CNC machining process, fine surface treatment, strong corrosion
resistance
With automatic reset function, if the pedestrian reads the valid
card, if the user does not pass within the specified time, the
system will automatically cancel the user's permission for the
pass.
Easy to use, convenient for the passage of luggage
Anti-tailing function: protection level 2
Access mode: one-way, two-way (optional), adjustable running speed;
multiple working modes are optional
Lighting Tip: Passing Direction
With lightning protection and leakage protection
Prevent illegal operation and alarm function
Standard external electrical interface with safety isolation, can
be connected with various control devices for system integration
Remote control and setting function
Electrical and Environmental
Voltage: 220V
Frequency: single phase 50Hz to 60Hz
Working voltage: DC24V
Current: static 300mA; dynamic 4A (maximum operating current)
Operating temperature: -20 to 70 ° C (-4 to 158 ° F)
Storage temperature: -40 to 80 ° C (-40 to 176 ° F)
Relative humidity: 5% to 95% in non-solidified state
Basic parameters:
| Dimensions | L1520 mm X W1480mm X H2300 mm |
| Cabinet material | 38 round tube, 1.5mm SUS304 |
| Channel width | ≤ 600mm |
| Ambient temperature | -20 degrees to 60 degrees |
| Working environment | indoor and outdoor (outdoor canopy) |
Technical Parameters:
| Input voltage | 100V~240V |
| Driving voltage | 24V |
| Equipment power | 30W |
| Response time | 0.2S |
| Passing speed | 30 people / min |
| Communication interface | RS485 |
| Communication distance | less than 1200m |
| Open brake signal input | dry contact |
| Switching door time | Less than 1S |
Functions:
1) The entire system runs smoothly, with a small noise and free of
mechanical impact.
The system adopts the exclusive technique of. double cam. As a
result, the turnstile is more accurate and reliable for zero point
locking and unlocking.
2) DC Brushless Motor, Maintenance Free
3) It has failure self-detect and alarm indication function,
facilitating maintenance and application for the users.
4) It is provided with multiple operation modes for selection. It
can either read card in double way for flow limit, or reading card
in a way while barring in the other, or read card in a way while
free passage in the other. More over, the operation mode of
turnstile may be set up with the built-in small keyboard.
5) It has automatic function of opening or closing when power off.
6) The equipment is provided with a unified, standard electric
interface and is available to be integrated with various read/write
facilities to facilitate the system integration. It is able to
realize far end control and management with the help of
administrative computer.
7) It has a function of reading card with or without memory, and it
may be set up with the built-in small keyboard in accordance with
the requirements of the users.
8) Counting the passing people number automaticity, and with LED
display
9) Direction indicator function, showing passing or prohibiting for
the people
10)Prohibiting opposite direction passing, one side reading the
card, the other side will lock when you passing force; the locking
time can be setted, and unlocked by the card.
11)Prohibiting illegal passing, the turnstile without the card, the
locking time can be setted, and unlocked by the card.
12)Anti-hit against function when the turnstile touch the passing
people, it will stop and after several seconds, it will turn again.
13)Self resetting function the system will cancel the people
passing right when reading the card but not passing, the time can
be setted.
14)RS485 Communication function .
FAQ:
Q: Are you manufacturer or trader?
A: We are manufacturer, we have own factory in Shenzhen, we have
independent department for purchasing, producing, processing,
testing, packing, storing , and transportation, believe our team is
best team in china.
Q: Do you sell the accessories for Products ?
A: Yes. We have Match the parts for our testing equipment. If our
machines damages by fire, water flood, earthquakes, unsteady of
power and other natural disasters, we are willing supply match
parts with lowest price for you.
Q.How about your after-sales policy?
A:Customer first is our always principle . All of our products
normal warranty is 24months. We give necessary back or video
guidance for daily problems. If massive products occur big quality
problems. Our technical and engineer support overseas service .
Q: What is the MOQ?
A: 1 set.
Q: How can I contact you?
A: Whatapp/ Tel / Wechat: +86 13714580607
